TD0611: Channels Outside Regulatory Domain
Publication Date
2021.09.29
Protection Profiles
MOD_WIDS_V1.0
Other References
WIDS SD v1.0, FAU_WID_EXT.2
Issue Description
FAU_WID_EXT.2.1 has a selection for channels outside the regulatory domain, but the Channels Monitored tests for the SFR require channels outside regulatory domain to be monitored. Resolution
The Channels Monitored tests for FAU_WID_EXT.2.1 in the Supporting Document for WIDS PP-Module v1.0 are modified as follows, with strikethroughs denoting deletion and underlines denoting addions: Test 1: Channels on On 5GHz band Step 1: Configure the TSF to monitor the channels as selected in the SFR. Step 2: Deploy an AP on at least 2 different channels within the regulatory domain on 5GHz band. Step 3: Deploy an AP on at least 2 different channels outside the regulatory domain on 5GHz band. Step 43: Verify that the AP gets detected on each channel tested.
Test 2: Channels on 2.4GHz band Step 1: Configure the TSF to monitor the channels as selected in the SFR. Step 2: Deploy AP on at least 2 different channels within the regulatory domain on 2.4GHz band. Step 3: Deploy AP on at least 2 different channels outside the regulatory domain on 2.4GHz band. Step 43: Verify that the AP gets detected on each channel tested.
Test 3: Channels on 4.9GHz band (if selected) Step 1: Configure the TSF to monitor the channels specified in the SFR. Step 2: Deploy AP and set to channels within the 4.9 GHz band outlined in the TSS. Step 3: Verify that the AP gets detected on each channel tested.
Test 4: Non-standard channel frequencies (if selected) Step 1: Configure the TSF to monitor the channels as selected in the SFR. Step 2: Deploy AP on at least 2 different channels on non-standard channel frequencies. Step 3: Verify that the AP gets detected on each channel tested.
Test 5: Channels outside regulatory domain (if selected)
Step 1: Configure the TSF to monitor the channels as selected in the SFR. Step 2: Deploy an AP on at least 2 different channels outside the regulatory domain on 5GHz band. Step 3: Deploy AP on at least 2 different channels outside the regulatory domain on 2.4GHz band. Step 4: Verify that the AP gets detected on each channel tested. Justification
See issue description. |